FAQs
More FAQs- How long will it take to have my floors coated with acrylic?
- Why do I need to clean and disinfect?
- Do I need to do anything prior to the technician arriving for my scheduled service?
Preparation will depend on the condition of the existing floor, current number of coats, repairs required, etc. When applying an acrylic finish, stripping of the old finish is usually necessary. When that’s the case, finish removal plus the application of 3 coats of finish requires 1 hour for every 150 square feet of flooring. Generally, 3 coats of finish are required to achieve the desired effect. If a floor does not require stripping, it can generally be shower scrubbed which is a procedure used for preparing a floor for receiving a new layer of finish. Once that has taken place, a floor can be recoated at anywhere from 4,000 to 6,000 square feet per hour.
A common misconception is that cleaning and disinfection are one and the same. In reality, they are two different processes which achieve related results but not the same results. Cleaning is the removal of visible dirt and soiling, for example the coffee ring on a kitchen counter. While cleaning may remove pathogens from surfaces by wiping them away, it does NOT kill pathogens. Disinfection, on the other hand, does KILL pathogens on surfaces through the use of chemicals. As such, both processes are used hand-in-hand — first cleaning, then disinfection — in infection control efforts. Please note — not all disinfectants are created equally! Typically, disinfectants are developed to kill certain types or classes of pathogens. As such, ensure that the disinfectant used in your facility has been approved to treat your pathogen of concern.
Yes, we ask that you remove breakables from the tops of furniture in the breakroom, lobby, conference room and other areas we will be cleaning. Pick up moveable items from the floor such as rugs, plants, trash containers, recycle bins, file cabinets, chairs, etc. Vacuum or dust mop all debris found on your floors prior to your cleaning. If items are too large to move, consult with your technician.